Measurement accuracy is perhaps the most critical consideration when sewing the curtains. You should check the location where the curtains should be hanging by themselves or made by a specialist.

Ready made curtains can fits precisely according to the dimensions of this space, whether it be a door or a window or some other location in your home or office. There would be no worse than the incorrigible curtains in your room. The whole result of the home decor is literally being spoiled. Neither at home nor in the workplace does anyone want to see those curtains in their rooms. The replacement of curtains can be a strain on our finances, since clothes and sewing are also somewhat costly.

When you are not in a rush or trouble, the main tip of calculating curtains is to compare proportions. It requires time to take precise measurements.

Secondly, during calculations, the form of cloth should be remembered. Tabletops are offered in a wide range. Any kinds of textiles may be stretched. Care can also be taken when such a fabric is measured. This can be a difficult task since stretchable substances each time they are tested provide a different measurement. It should be no problem if you’re an expert in measuring these fabrics. It is best to employ the help of a professionally trained in this field to be on the safer side.

Third, one can still note that after the first wash much of the ribs begin to shrink. It is prudent to thread additional fabric on the side and bottom of the ribs in the seams. Therefore, a gap of certain inches / cm could be applied before taking measures of the duration and width of the curtain to prevent any later complications.

Fourth, it is necessary to keep in mind how large the dimensions are if you weigh the curtains yourself. You would have the same scales and the tailor who is going to pin the curtain. For instance, you can purchase the fabric in inches after you have measured the door frames and inform the customer that it must also be cut in inches. If there is a kind of size confusion, i.e. if anyone mix the dimensions in metres or centimetres, you or the tailor, it is likely that a big tragedy will arise.

Last but not least, the distance of the window pole or curtain track and not of the window should be determined. Often bear in mind where you want the curtain to go: on the board, on the sill of the window or under the sill of the window. In addition, the duration from the top of the rack should be calculated to the stage where you want to finish the curtain.